Work Order Sheet Red
Home > Work Order Sheet Red

Work Order Sheet red

INSTRUCTIONS: PLEASE USE 1 SHEET PER ALLOY. IF USING THE SAME ALLOY BUT DIFFERENT HARDNESS REQUIREMENTS, THEN USE A SEPARATE SHEET FOR EACH

PRESENT CONDITION OF PARTS *
FINISHED
SEMI
ROUGH
ANNEALED
CARB ONLY
PRETREATED
WELDED
QTY PART # DESCRIPTION HARDNESS JOB NUMBER UNIT WEIGHT TOTAL WEIGHT COLUMNS
HOT WORK STEELS *
PROCESSES * (CHECK THOSE THAT APPLY)
AGE TO HARDEN TO CONDITION AUSTEMPER
CARB HARDEN TO (EFFECTIVE)(CASE)
“REQUIRES HARDNESS SPEC.”
STRESS RELIEVE
NORMALIZE NORMALIZE AND TEMPER
CARBONITRIDE TO (EFFECTIVE)(CASE) STRAIGHTEN ONLY (EFFECTIVE)(CASE)
GAS NITRIDE TO (EFFECTIVE)(CASE) BLAST ONLY
DOUBLE TEMPER FLAME HARDEN - NEED PRINT OR DESCRIPTION OF AREA TO BE FLAME HARDENED
MAR-QUENCH THROUGH SALT SOLUTION ANNEAL
CRYO-TREAT (-100F) To CRYO-TREAT From (-300F)
SUB-CRITICAL ANNEAL FINAL STRESS TEMPER @ (EFFECTIVE)(CASE)
 
WILL PARTS BE EDM’D AFTER HEAT-TREAT? OR COATED? (Parts will receive an additional temper if checked.)
MASK OR PAINT
STRAIGHTEN TO
SHOT BLAST
HAND BLAST
RUST INHIBITOR
100% HARDNESS INSPECTION REQUIRED
CERTIFICATION OF HEAT-TREATMENT
FURNACE CHARTS REQUIRED
HEAT-TREAT TO THE ATTACHED SPECIFICATION
CUSTOMER PICK UP
THERMTECH TRUCK
UPS
CALL